About the blockage cleaning method of the water device!

There are several types of launching devices, first of all, the lifting type, and then the flip plate and bouncing type. Generally speaking, these sewers have been used for a long time. If they are not cleaned in time, their mechanical properties are not very easy to use due to the accumulation and adhesion of dirt. The old-fashioned pull-up drain is not commonly used now. Now choose the one that can take out the whole inner core and put it back after cleaning, which is convenient for cleaning.
Round Shape Simple Bathroom Floor Drainage Brass Floor Drain

If the irrigation operation is slow, it may be the problem of hair blockage. Although the following method is not precise, it is often useful. That is to use a clothes hanger to straighten it, so that you can rotate the drainage hole at the curved end, travel it to the position where you shave your hair, slowly pull it out of the sewer, and clean up the problem of accumulated hair blockage. You can also pour some detergent or similar products into the sewer and wait 30 minutes for hot water to soak the sewage device before running. If you don’t want to use harsh chemicals, you can also pour soda into the sewer; The second is half a cup of white vinegar. Cover the irrigation with rags and quickly plug it into the drainage hole. Baking soda and vinegar will produce a chemical reaction, so it is important to keep the digestive hole covered so that the content does not escape. Slowly remove the oil drain plug after 30 minutes, and pour 1 gallon of hot water into the sewer, which can solve the blockage problem of the sewer device.
Blocking and cleaning method of water device:
Round Shape Simple Bathroom Floor Drainage Brass Floor Drain

1. When the water switch of the basin is in the springing irrigation state, hold the springing water switch with your hand, turn it counterclockwise, and the cover of the water switch will be screwed off;
2. After screwing it off, soak it in water directly. You can also brush it with a small brush;
3. There will also be a lot of hair and other dirt in the sewer, and then use small tweezers to clamp out the hair and other dirt accumulated at the water outlet. Soak it in water again;
4. Confirm that the soaking is clean, and then tighten the cover of the water device switch clockwise.


Post time: Jul-09-2022